37
Sleep Schedule
- Enable to configure the CloudStation to shut down during preset periods.
Maintenance
- Clicking
Restore
restores your CloudStation to its factory default settings.
Normally, this doesn’t affect data stored on the drive. However, you may choose to check
Erase
data
before clicking
Restore
, which will erase all data on the drive. Note that this will not
unregister the device. If you choose to erase data, it may take several hours to complete.
Clicking
Rebuild Media Library
will recreate thumbnails and re-transcode your videos and movies.
Active copy jobs to or from folders on the CloudStation will need to be restarted. This operation
cannot be stopped or reversed.
Note:
Restore
and
Rebuild Media Library
can only be used when you are connected to the
CloudStation locally.
Updates
- If enabled, the CloudStation will be automatically updated with the latest firmware.
This is enabled by default. If an update results in unexpected behavior, clear your browser’s
cache.
Status
- This gives you current system settings for your CloudStation and information about the
network.
Language
- Select your language from the drop-down list on the top right side of the screen. Note:
This only changes the language for the local UI of the device. To change the language for the
Cloud UI, click
Return to library
and then click the language tab at the top right.
Restart CloudStation
- Power cycles the device. The button is located on the right side of the top
bar.
