Telephone Helpline
: 0845 146 2887
UK
3
Operation
Place the plug in the electric socket to connect electricity.
Partly fill the Body with water, place the Liner inside the Body, then place the Top Ring over the lip of the
Liner to secure in place.
Pour the hot soup or food in to the Liner, then position the Lid on the Top Ring.
Switch on electricity at socket.
Start heating by rotating the control knob clockwis
e.
Cleaning, Care & Maintenance
Disconnect from electricity supply, allow to cool before emptying the water from the Body, always use
fresh water when the kettle is to be used.
Always wash the Kettle Liner, Top Ring and Lid after every use.
Wipe both exterior and interior of the Body to remove any food residues, do not immerse the Body in
water or clean with a pressure washer.
Trouble Shooting
Fault
Probable Cause
Action Required
Indicator Light does not
come on & Warmer does not
heat up
Power is not switched at socket
Turn power on at socket
Plug fuse has failed
Change fuse
Power cable is damaged
Call BUFFALO dealer for repair service
Thermostat has failed
Call BUFFALO dealer for repair service
Indicator Light comes on but
Warmer does not heat up
Heating element has failed
Call BUFFALO dealer for repair service
Thermostat has failed
Call BUFFALO dealer for repair service
Technical Specifications
Code
Voltage
Power Watts
Current Amps
Dimensions mm
Weight Kgs
CD410
240V/50Hz
300
1.3
348 x 270 x 234
2.94
43744 - CD410 Soup Kettle.2.indd 3
23/12/09 14:19:49
