Buffalo BS-MP20 Series, User Manual

Page: 24 / 49

Speed/Mode Settings
Configure ports settings such as the transmission rate or flow control.
Name
Enter the port name. You may enter up to 15 alphanumeric characters, hyphens (-),
underscores (_), and spaces.
Admin
Check to enable the port.
Mode
Select the transmission rate and duplex from below.
Autonegotiation
The transmission rate (max 10 Gbps) and duplex status will be configured
automatically depending on the connected device. Select this during normal
operation.
100M bps Full
The transmission rate will be fixed at 100 Mbps. And the duplex status will be fixed
at full.
Autonegotiation (5G)
The transmission rate (max 5 Gbps) and duplex status will be configured
automatically depending on the connected device. Select this if the switch cannot
communicate with the connected device when "Autonegotiation" is selected.
Autonegotiation (2.5G)
The transmission rate (max 2.5 Gbps) and duplex status will be configured
automatically depending on the connected device. Select this if the switch
cannot communicate with the connected device when "Autonegotiation" or
"Autonegotiation (5G)" is selected.
Flow Control
Check to enable flow control.
IEEE 802.3az
Check to enable IEEE802.3az.
APD
Check to enable APD (auto power down). If enabled, power consumption of link
down ports can be reduced.
Jumbo Frame
Check to enable jumbo frame settings.
Speed/Duplex
Displays the current transmission rate and duplex.
23