Buffalo BS-MP20 Series, User Manual

Page: 21 / 49

Untagged
Select when you assign the port to untag member.
Not Member
Select when you do not assign the port to any member.
Reset
Click to reset the changes to the previous settings.
Uplink
Appears when "Privacy Separator" is selected.
A router should be connected to the uplink port to connect to the Internet. Uplink
ports can communicate with all downlink ports. Specify at least 1 port to an uplink
port.
Downlink
Appears when "Privacy Separator" is selected.
Downlink ports are the ones which each device connected to. Downlink ports can
communicate with uplink ports, but cannot communicate with each downlink
port.
Note:
In privacy separator mode, only the device connected to an uplink port can open Settings. If you configure
the port that your computer is connected as a downlink port, you cannot open Settings any more.
VLAN Ports
Configure PVID (Port VLAN ID).
PVID
Specify the port VLAN ID. The received untagged frames will be recognized as the
specified VLAN ID. (1-4094)
Acceptable Frame Type
Admit All
Receive both untagged and tagged frames.
Tagged Only
Receive tagged frames only and drop untagged frames.
20