manualshive.com logo in svg

Buffalo AirStation NFINITI WHR-HP-G300N, Firmware User Manual, Page: 108 / 155

Share
Download
Buffalo AirStation NFINITI WHR-HP-G300N Firmware User Manual Download Page 108

Chapter 4  Configuration

WHR-HP-GN / WHR-HP-G300N User Manual

77

Save/Restore

You may save your AirStation’s settings as a file and restore settings from that file later.  

Parameter

Meaning

Save current settings

Clicking [Save] will save the current configuration of the AirStation 
to a file. If the [Encrypt the configuration file with a password] 
option is checked, then the configuration file will be password 
protected with the current Administrator Password.

Restore Configuration from Backup 
File

Restore the configuration of the AirStation from a saved 
configuration file by clicking the [Browse...] button, navigating to 
the configuration file, and then clicking Restore. If the configuration 
file was password protected, then put a check next to [To restore 
from the file you need the password], enter the password, and click 
[Open].

Summary of Contents for AirStation NFINITI WHR-HP-G300N




























































































































































Reviews:

No comments