ITEM # EPW1300 Electric Pressure Washer Assembly & Operating Instructions
2
SPECIFICATIONS
Working Pressure: 1300 PSI
With GFCI
Flow: 4.8L/min (1.27 GPM)
Motor Power: 1200W
Volt/Frequency: AC 120V - 60Hz
Carbon Brush Motor/ Aluminum Wire
Accessories Included:
Spray gun with adjustable spray nozzle
16.4 ft Hose
16.4 ft Power cord
Quick Connect Water Inlet
Nozzle Cleaning Pin
Detergent Bottle
Instruction Manual
Hose Fitting: 3/4" with 11.5 TPI Thread
IMPORTANT SAFETY INSTRUCTIONS
Read and obey all warning labels attached to the unit:
KEEP ELECTRICAL CORDS SUSPENDED ABOVE SURFACES THAT COLLECT WATER. THIS DEVICE USES
ELECTRICITY AND WATER TO EFFICIENTLY CLEAN DIRT. TAKE NOTE OF WHERE THE WATER IS
POOLING AND KEEP ELECTRICAL CONNECTIONS AWAY FROM POOLS OF WATER. ELECTRICAL
CONNECTIONS AND CORDS SHOULD NEVER BE SUBMERGED.
KEEP HANDS CLEAR OF THE MOVING PARTS. NEVER PUT HANDS OR ANY OTHER BODY PARTS IN
FRONT OF WATER GUN. NEVER POINT THE WATER DIRECTLY AT ANY PERSON.
ELECTRICAL SHOCK HAZARD. THIS UNIT IS EQUIPPED WITH A GFCI (GROUND-FAULT CIRCUIT
INTERUPTER) THAT PRTOECTS THE OPERATOR. NEVER TAMPER WITH, DISABLE, OR REMOVE GFCI.
WARNING
- DO NOT TOUCH THE PLUG WITH WET HANDS! Reduce the risk of electrocution by keeping all
connections dry and off the ground.
Do not use the pressure washer if the electrical cord or any important parts are damaged. If an extension cord is
used, the plug and socket must be of watertight construction.
WARNING
: Inadequate extension cords can be dangerous. Only use extension cords that are suited for the amount
of amps generated by this pressure washer.