55
Maintenance Settings
LinkStation Disk Scan
Disk Scan:
The
‘Disk Scan Target’
is the disk that is to
be scanned. The
‘Internal HDD’
option is for
LinkStation’s internal hard drive. If a USB Hard
Drive is connected to LinkStation, then it will
be available from the pull-down menu. Please
select the disk that should be scanned. If both
disks are to be scanned, then the
‘Disk Scan’
must be run twice; once for each disk.
Disk Scan Type:
The
‘Disk Scan Type’
pull-down menu allows you to select whether the
‘Disk Scan’
is to be a
‘Normal’
or a
‘Thorough’ scan
. A normal scan will perform a fast disk scan. The ‘
Thorough Scan
’ will scan
every sector individually. The
‘Thorough Scan’
can take up to several hours to complete. It is
recommended to not access LinkStation or turn LinkStation off during a
‘Thorough Scan’
.