Buffalo Tech LinkStation EZ, User Manual

Page: 67 / 73

67
Disk Errors
If LinkStation encounters a disk error, it will be reported in the LinkStation status on the top
of any of the Web-Based configuration screens. Run a
Disk Scan
in the event of this error. If
that doesn’t work, try a reformat. Reformatting the drive will delete all of the data on it so try
to backup any data you can before beginning. Finally, if none of the above solutions help, then
please contact Technical Support for further assistance.
LED Flash Codes:
The blue LED will flash to indicate error type:
3 flashes - Partition problem with hard drive. Reformat the hard drive.
4 flashes - RAID problem.
5 flashes - ROM problem.
6 flashes - Hard Drive not recognized.
7 flashes - Problem with motherboard (RAM, LAN, or Hard Drive controller).
Troubleshooting