3
Step 2 - Connecting the AirStation
1.
Power down the Cable or DSL modem and the computer which will be
used to confi gure the AirStation router.
2.
Screw external antenna on to top of AirStation.
3.
Plug the Cable or DSL’s LAN Ethernet cable into the AirStation’s WAN
port. Initially, you may need to unplug this cable from your computer,
hub or other router.
4
. Plug the provided Ethernet cable into a LAN port on the AirStation
and plug the other end into your computer’s Ethernet adapter’s (NIC)
port. If you plan to initially confi gure the AirStation wirelessly (not
recommended), you may skip this step.
5
. Power on your cable or DSL modem and wait one full minute, then
power on the AirStation router (by plugging in its power) and wait
another minute, and fi nally power on the computer which will be used
to confi gure the AirStation. If the red DIAG light on the AirStation is
still lit or fl ashing after several minutes of being powered on, please
consult Buffalo Technology Technical Support.
Ethernet cable to
Cable/DSL modem
AC power
Ethernet
cable to PC
