Buell XB 2010, Service Manual

Page: 115 / 714

1
3
2
sm00514
1. Puller assembly
2. Collet
3. Forcing screw
Figure 2-24. Expand the Collet
1
3
2
sm00515
1. Bridge
2. Nut
3. Forcing screw
Figure 2-25. Remove the Bearing
3
1
2
6
4
5
sm00516
1. Nut
2. Bridge
3. Forcing screw
4. Collet
5. Ball bearing
6. Wheel bearing
Figure 2-26. Removing Bearing from Puller
sm00517
Figure 2-27. Remove the Spacer
Installation: Rotor Side Bearing
Using compressed air to "spin dry" bearings can cause
bearing to fly apart, which could result in death or serious
injury. (00505b)
NOTES
• First, press the rotor side bearing against the shoulder in
the hub. Then press the opposite side bearing until it
contacts the spacer.
• Always install the rotor side bearing first with the lettering
engraved in the race facing out.
1. See Figure 2-28 . Install the BACKING PLATE (Part No. B-
43993-11) (1) onto the long forcing screw (2) from the
HOME
2010 XB Service: Chassis 2-35