15
The Collision Detection System
prevents indenter or objective damage
by detecting unintended obstructions
in the test path. The motion system is
continuously monitored during the
test process and system movement
is instantaneously stopped if an
obstruction is detected. The Collision
Detection System provides an
unparalleled, unique to market essential
safety benefit for operators, while
reducing downtime and maintenance
costs.
Developed by the same team, the
Wilson VH3000 series testers and
DiaMet software are completely
complimentary to one another.
This perfect fit results in the fastest test
cycle, fastest auto-focus and fastest
auto-measure sequence. By delivering
accurate results faster, the user is
able to either quickly focus on and
control internal processes or perform
additional tests.
Often a high level of automation comes
with a high level of complexity both
in setup and in operation. Breaking
convention, the DiaMet™ software
focuses on fast and simple operation
to compensate for less experienced
operators while still offering a high
feature set and flexibility required by
expert users. Once a required test
pattern is setup, any operator can run
the series of Vickers or Knoop indents
with a minimum of four clicks or four
touches depending on the monitor
options.
Automation
Speed
Safety
DiaMet is optimized for evaluating Macro-Vickers, Micro-Vickers and Knoop indents according to ISO 6507, ISO 4545 , ASTM E384
and ASTM E92 as well as Brinell measurements according to ISO 6506 and ASTM E10 standards. A standard DiaMet feature is an au-
tomatic symmetry calculation for Vickers, Knoop and Brinell indents. This extra validation, with clear visual indication, helps to ensure
the results conform to standards.
Versatile
Brinell
Knoop
Vickers
4 clicks
to run an automated test
5 seconds
or less for Auto-focus & Automeasure
Collision Detection
Indenters & Objectives
