Logamatic EMS RC35 programming unit - Subject to technical modifications
25
Operation with the user menu
5
5.2
Overview of the user menu
The user menu is divided into the following menu items:
9.
Press
to go back one step.
-or-
To finish making settings: press
several times or close
the flap.
The standard display reappears.
You can enter all settings in the USER MENU using this procedure.
Menu item
Purpose of the menu item
Page
standard display
Selecting the standard display (= “permanent display”)
29
operating modes
Setting the operating mode for all installed heating circuits (automatic
operation, continuous heating, permanently reduced); also possible for the
DHW and DHW circulation heating circuits
29
switching programme Switching between day and night mode at defined times and on defined days
(only active in automatic mode); separate programs possible for DHW and
DHW circulation
31
sum./win. threshold
Switching automatically between summer mode and winter mode (subject to
outside temperature)
39
summer / winter
Setting the clock to change over automatically between summer and
wintertime
39
DHW temperature
Setting the DHW temperature
40
holiday
Interrupting the set switching program when on holiday (to save energy if away
or to ensure comfort if at home)
40
party function
One-off extension of day mode for a certain amount of time
43
pause function
One-off interruption of day mode for a certain amount of time (when absent)
43
therm. disinfection
1)
1) This function depends on the boiler used.
Heating up DHW to kill off pathogens
44
room temp. correct.
Calibrating the displayed room temperature with the aid of a thermometer
44
GWP preheat phase
Setting a heat pump with gas booster heater
45
Tab. 9
User menu overview
Operation
Result
Tab. 8
How to use the user menu (example)
