Initial burner start-up
6
Buderus Blue Flame Burner BE 1.3 - 2.3 - Specifications subject to change without notice.
22
6.8
Carrying out safety test
z
Pull flame sensor out of the retainer by the handle
with the burner operating (Fig. 18,
Item 3
).
z
Hold flame sensor against a light source (Fig. 18,
Item 1
). It must shut off immediately, then lock out af-
ter restarting.
z
Insert flame sensor again after the shutoff.
z
After waiting for about 30 seconds, reset the auto-
matic burner controller by pressing the reset button
(Fig. 18,
Item 2
).
z
Run through function sequence (see Chapter 6.5
„Starting the Burner“, page 17).
Fig. 18
Check function of flame sensor
Item 1:
Flame sensor
Item 2:
Reset button
Item 3:
Handle on flame sensor
3
1
2
