7
Boiler block assembly
Logano G515 – 6 720 647 208 (2014/09)
29
▶ Push the center boiler cover with the folded edges (
Fig. 53, [1])
under the front boiler cover and insert into the bead of the side
panels.
Fig. 53 Fitting the center cover
▶ Fit the rear boiler cover on the side panels with the folded edges and
cut-out for the heating circuit flow (
Fig. 54, [1]) facing toward the
front.
Fig. 54 Fitting the rear cover
▶ Push upper rear boiler panel under the rear boiler cover (
Fig. 55,
[1]) and screw to the side panels from the back using four self-
tapping screws (
Fig. 55, [2]).
Fig. 55 Fitting the rear boiler panel
▶ Insert snap nuts into the left and right-hand side panels and also the
rear boiler panel sections (
Fig. 56, [1, 3, 4, and 8]).
▶ Hang the bottom rear boiler panel sections on the left and right into
the slots in the folded edge of the upper rear boiler panel and the side
panel (
Fig. 56, [5]).
▶ Secure the rear panel sections of the boiler to the side panels with
self-tapping screws.
▶ Screw the connecting plate (
Fig. 56, [2]) below the flue outlet to
the rear boiler panel sections using self-tapping screws.
▶ Fasten the plastic cable entries to the left or right-hand side of the
upper rear boiler panel (
Fig. 56, [6 and 7]).
Fig. 56 Installing the rear boiler panel sections
6 720 642 623-51.1o
1
6 720 642 623-52.1o
1
6 720 642 623-53.1o
1
2
6 720 642 623-54.1o
6
5
4
3
8
7
1
2
Summary of Contents for Logano G515
Page 66: ...Appendix Logano G515 6 720 647 208 2014 09 66 ...
Page 67: ...Appendix Logano G515 6 720 647 208 2014 09 67 ...
Page 68: ......
