Logamax plus GB162-65/80/100 - Subject to modifications resulting from technical improvements!
4
Installation not exceeding 70 kW rated input
BS 5440
Installation and maintenance of flues and ventila-
tion for gas appliances of rated heat input not
exceeding 70 kW net (1st, 2nd and 3rd family
gases). Specification for installation and mainte-
nance of flues.
BS 5449
Specification for forced circulation hot water central
heating systems for domestic premises.
BS 5546
Specification for installation of hot water supplies for
domestic purposes, using gas-fired appliances of
rated input not exceeding 70 kW (2nd. family
gases).
BS 6798
Specification for installation of gas-fired boilers of
rated input not exceeding 70 kW net.
BS 7593
Code of practice for treatment of water in domestic
hot water central heating systems.
BS EN 483
Gas-fired central heating boilers. Type C boilers of
nominal heat input not exceeding 70 kW.
BS EN 677
Gas-fired central heating boilers. Specific require-
ments for condensing boilers with a nominal heat
input not exceeding 70 kW.
Installation of rated input greater than 70kW
BS 6644
Specification for Installation of gas-fired hot water
boilers of rated inputs between 70 kW (net) and
1.8 MW (net) (2nd and 3rd family gases).
BS EN 15417:2006
Gas-fired central heating boilers. Specific require-
ments for condensing boilers with a nominal heat
input greater than 70 kW but not exceeding
1000 kW.
BS EN 15420
Gas-fired central heating boilers. Type C boilers of
nominal heat input exceeding 70 kW, but not
exceeding 1000 kW.
The boiler name is made up of the following elements:
GB:
Condensing gas boiler
162:
Type
65, 80 or 100:
Heating range in kW
Buderus has a policy of constant product improvement,
which may result in deviations in technical data. If you
have any suggestions for improvements or have found
any discrepancies, please do not hesitate to contact us.
Buderus,
Cotswold Way, Warndon, Worchester
WR4 9SW,
United Kingdom
E-Mail: [email protected]
Document no.: 7217 5100 (03/2010) GB
The manufacturer of the boiler is not responsible for any
damage due to failures to observe the instructions in this
User Manual.
If you have any doubts or questions, please contact the
installer or the service company.
Due to the high efficiency of the boiler a plume of water
vapour may form at the terminal during operation. This
is normal.
Manufacturer’s notes must not be taken in
any way as overriding statutory obligations.