5
Fitting
Logalux LTN/LTD/LTH/LF 400...3000 – 6 720 818 806 (2015/12)
18
▶ Place the fixing straps around the front and back panels and tension
them.
Fig. 30 Tensioning the front and back panels
▶ Place the middle tensioning wheel around the front and back panels
in the same way and tension it, so that the position where they butt
together is covered.
Fig. 31 Placing the middle tensioning wheel around the front and back
panels
▶ Attach the cover of the hook locking bracket.
Fig. 32 Attaching the cover of the hook locking bracket
▶ Press the foam wedges into the feet.
Fig. 33 Pressing the foam wedges into the feet
5.4.5
Fitting the thermal insulation, control units and
immersion heaters for double and triple cylinders
▶ To ensure greater stability, screw 4 cylinder feet [2] to all triple
cylinders, using 2 screws [2] and nuts [3] for each foot.
▶ Fasten each foot to the floor with a screw and rawl plug.
Fig. 34 Fixing triple cylinders to the floor
[1]
Screw
[2]
Cylinder foot
[3]
Nut
[4]
Washer
[5]
Connecting screw
▶ In the case of double and triple cylinders and in contrast to the single
cylinder, particularly close attention must be paid to the joining of the
storage cylinders and the arrangement of the different thermal
insulation sections.
▶ Align the bottom storage cylinder.
▶ Place the top storage cylinder with the cylinder feet onto the bridge
of the bottom storage cylinder in such a way, that the fastening holes
are exactly aligned.
6 720 817 906-30.1T
6 720 817 906-31.1T
6 720 817 906-34.1T
6 720 817 906-24.1T
Summary of Contents for Logalux LTD950
Page 24: ......
