4
Transporting the boiler
Logano plus GB402 – 6 720 820 700 (2018/01)
14
4.1
Transporting the boiler by crane/hoist
▶ Route the lifting gear (round slings) through the pallet.
Fig. 4
Transporting the boiler on its pallet by crane/hoist
4.1.1
Lifting the boiler off the pallet
▶ Remove 4 safety screws [1].
Fig. 5
Separating the boiler from the pallet
[1]
Locking screws
[2]
Fixing bar
4.2
Transporting the boiler on rollers
If the path to the installation location is level, the boiler can also be
rolled. For this use at least 5 pipe sections of approx. 900 mm length
(R 1¼ " diameter) as rolling supports.
▶ Position the pipes approx. 400 mm apart on the floor.
▶ Lift the boiler onto the pipe sections and carefully transport it to the
installation location.
Fig. 6
Transporting the boiler on rollers (measurements in mm)
NOTICE:
Boiler damage through means of transport!
Without the inverted carton, the boiler frame will deform
through lifting it by crane/hoist.
▶ When transporting the boiler do not remove the
inverted carton with internal wooden crate.
NOTICE:
Boiler damage through impact!
The boiler is at risk of tipping over if it is pushed off the
side of the pallet.
▶ Push the boiler off the pallet towards the burner or
flue gas side. When pushing the boiler from the flue
gas side, remove fixing bar [2].
▶ Prevent the boiler from coming down hard.
Commercially available transport rollers can be used.
▶ Ensure even load distribution on the load-bearing
parts to prevent distortion of the bottom plate.
Protect boiler from contamination if the boiler is not to
be taken into use immediately.
Dispose of packaging in an environmentally responsible
manner.
Summary of Contents for GB402-320-5
Page 62: ...Logano plus GB402 6 720 820 700 2018 01 62 Notes...
Page 63: ...Logano plus GB402 6 720 820 700 2018 01 63 Notes...
Page 64: ......
