background image

Users manual

10

Users manual for Buderus 500-24S • 07/2007

Buderus • http://www.buderus.co.uk

Subject to modifications resulting from technical improvements

11

Taking the system out of service

z

Turn off the boiler by pressing the mains switch to "

0

" (fig. 4, 

item 1).

z

Close the gas service valve by turning it clockwise

 

(fig. 7, item 1).

Frost protection

The boiler has an automatic frost protection. When the CH flow 
temperature drops below 7 °C then the boiler will start up.

11.1

Draining the system in case of frost

It is not recommended, but if the boiler needs to be shut down 
for a longer period of time, then it is necessary to drain the sys-
tem. Especially when there is a chance for frost conditions. 

z

Turn off the boiler by pressing the mains switch to "

0

" (fig. 4, 

item 1).

z

Close the gas shut off valve (fig. 7, item 1).

z

Drain the system at its lowest point using the stop valves or 
radiator (see fig. 8). The automatic air vent at the system’s 
highest point must be open.

fig. 7

Gas service valve

1

2

1

: Gas valve closed

2

: Gas valve open

fig. 8

Draining the system

Summary of Contents for 500-24S













Reviews: