Bucktool BG2600, Instruction Manual

Page: 15 / 24

8. Install the new wheel and make sure
both wheel flanges (10) are in place
with the concave sides toward wheels.
9. To prevent wheel rotating, place a
wood wedge (12) (not supplied)
between the wheel and the wheel
cover.
10. Tighten the hex nut (9) by an adjustable
wrench.
NOTE:
Do not overtighten the nut as this
can crack the grinding wheel.
11. Replace the wheel cover (7) and screws (5).
12. Reinstall and adjust the tool rest to 1/16 in. (1.6 mm) away from the wheel and
tighten securely.
13. Adjust the eye shield (1) to a point between your eyes and the wheel.
6. Remove the hex nut (9), the outside
wheel flange (10) and the wheel (11).
7. Inspect the wheel (11) for cracks, chips
or any other visible damage (other than
normal wear) and discard if such damage
is found. Inspect the blotter/cardboard
disc for damage. If the blotter is missing
or severely damaged, replace it with a
piece of thin cardboard or blotter paper
cut in the same shape. NEVER USE
A GRINDING WHEEL WITHOUT A
BLOTTER.
15
BG2600
MAINTEN
ANCE
9
10
11
10
9
1
12
tighten
REPLACING WIRE WHEEL (NOT INCLUDED)
A wire wheel (not included) can be used with
your grinder. You will need to add one or more
spacers (1) (not included) to allow the arbour
hex nut to tighten correctly.