background image

2 | Safety

Büchi Labortechnik AG

10/62

Operation Manual Sepiatec SFC-250

u

Make sure that the connected instrument is prepared and maintained according
to the user documentation.

2.7.7

Malware infection due to connections with other devices or network

Connections with other devices or a network can cause a malware infection to the
instrument.

u

Install antivirus software and firewall on the instrument before connecting it to
other devices or network.

2.8

Modifications

Unauthorized modifications can affect safety and lead to accidents.

u

Use only genuine BUCHI accessories, spare parts and consumables.

u

Carry out technical changes only with prior written approval from BUCHI.

u

Only allow changes to be made by BUCHI service technicians.

BUCHI accepts no liability for damage, faults and malfunctions resulting from
unauthorized modifications.

2.9

Warning signs

 DANGER

Risk of electric shock

Risk of death by electrocution

u

Never remove the housing.

u

Never operate the instrument with removed housing or without the included
pumps.

u

Never use any electric connections or cables that were not supplied with the
instrument.

 DANGER

Risk of cold burns

Pressurized gases can generate low temperatures on depressurization.

u

Always wear appropriate personal protective equipment such as safety goggles,
protective clothing and gloves.

Summary of Contents for Sepiatec SFC-250































































Reviews: