NIR-Online GmbH
Installation | 5
Operation Manual X-Sential™
21/34
5.5
Connecting the sensor
Tools required:
Torque wrench, size 7 mm AF
Torque wrench, size Torx T20
NOTE
Make sure that the power is not switched on when connecting the sensor.
NOTE
Loss of performance due to use of unsuitable device cables
Max. cable length between installation box and sensor 10 m.
u
Put the cable guard over the sensor ca-
ble.
u
Connect the sensor cable to the sensor.
u
Secure the connector.
Tightening torque: 2.5 Nm ± 0.5
u
Attach the cable guard to the sensor.
Tightening torque: 2 Nm ± 0.5
u
Attach the ground cable to the sensor.
Summary of Contents for NIR-Online X-Sential
Page 1: ...NIR Online X Sential Operation Manual 11594282 A en...
Page 33: ......
