16
Melting point
B-540
5.6
Program management
5.6.1 Assignment of a sample identification
If similar parameters are used all over again, it is recommended
to store them with sample names. By simply calling them up
from the memory, their repeated entering becomes dispensable.
As far as necessary, an identification (e.g. batch number or
test number) may be assigned to this method. The name and
the sample identification will then be printed out.
A sample name and the sample identification are entered into
the menu of the memory. The name used may consist of letters,
figures or a combination of figures with letters.
For easy entering of sample names and sample identifications
we recommend to use a keyboard (Büchi Art. No. 29599).
Actuate ENTER until the cursor is on the NAME field for entering
the method name.
Actuate NEXT until the cursor is on the correct position of the
horizontal which is to be modified.
An individual cursor position can be changed by actuating
UP/DOWN.
Press ENTER to transmit the method name. Enter the
identification again with UP/DOWN and NEXT.
Press ENTER to transmit the sample identification.
The name and sample identification are now printed out. But
the method has not yet been stored. If the method is to be
stored in the memory, change over to main menu 3.
5 Operation
TEMPERATURE
:
25.0°C
NAME
:
ID#
:
