Bucher Hydraulics LRV-1, Installation And Startup Manual, Page: 64 / 86

LRV-1 lift control valve 5 Operation
64/86
300-I-9010050-E-28/02.2012
5.2 Parameterisation with Miniterminal
Demand values
⇒
5.5.1
Options
⇒
5.5.2
Hall sensor
⇒
5.5.3
Informationen
⇒
5.5.4
- P1.01 Start speed
=
- P2.01 Valve type - Zero point - F4.01 1) Error
- P1.02 Min. pressure
=
- P2.03 SIU type - F4.02 2) Error
- P1.04 Acceleration
=
- P2.04 SIU-1 difference - F4.03 3) Error
- P1.05 Fast speed
=
- P2.05 SIU-4 threshold - F4.04 4) Error
- P1.06 Deceleration
=
- P2.16 Accel.inspection - F4.05 5) Error
- P1.07 Slow speed
=
- P2.06 Inspection speed - F4.06 6) Error
- P1.08 Soft-Stop
=
- P2.07 Decel.inspection - F4.07 7) Error
- P1.09 Relevelling
=
- P2.18 K6 acceleration - F4.08 8) Error
- P1.11 Start speed
O
- P2.08 K6 speed - d4.01 Software version
- P1.12 Offset sol.
O
- P2.09 K6 deceleration - d4.02 Hardware version
- P1.14 Acceleration
O
- P2.20 K7 acceleration
- P1.17 Fast speed
O
- P2.10 K7 speed
- P1.18 Deceleration
O
- P2.11 K7 deceleration
- P1.20 Slow speed
O
- P2.22 K8 acceleration
- P1.21 Soft-Stop
O
- P2.12 K8 speed
- P1.22 Relevelling
O
- P2.13 K8 deceleration
- P2.14 Decel. emergency
- P2.15 Pulsation sol.
- P2.24 Demand val. red.
- P2.25 Start delay
- P2.26 Relay function
- P2.27 Command input
- P2.28 Auxiliary curve
5.3 Overview travel curve parameters
Legend 1
2
3
4
5
Start speed
Acceleration
Fast speed
Deceleration
Slow speed
6
7
8
9
Soft-Stop (steepness)
Minimum pressure (UP)
/ Offset sol. (DOWN)
Demand signal
Solenoid control voltage
For parameter adjustment
⇒
page65, chapter5.5.1