1
BM T-01 instruction manual
Transformers Power: I / P: AC 100-240V 50-60Hz 0.36A O / P: DC 12V 1A
Quantitative Accuracy: better than ± 10%
Size: 235x160x70mm (without transformer power supply)
BM-T01 dosing pump is an advanced computerized controller unit. By itself, the BM T-01 can operate three
independent pump heads, using various adjustments. Each pump head on the unit or extending from unit can be
configured separately within the specified range of 1ml to 1999ml, and divided into different intervals of a 24hr day.
The BM-T01 is a master controller, and it can operate with two other BM-T02 extension/slave units (sold separately).
With each extension unit having the capacity of four more pump heads, the maximum number of pump heads for
which the BM T-01 can manage in a configured is 11 pump heads.
In addition, this product has a data protection feature. In the case of a power outage (blackout or brownout), the
BM-T01 can retain its settings up to 24 hours.
Thank you choosing BUBBLE-MAGUS. Please read the instructions carefully before use. If you encounter any
issues, whether it is in the packaging, during your installation, or during normal operation of your product, contact
Be sure to register your product to activate your warranty.
BM-T01 Packing List
No. Name
Amount Notes
1 Quantitative pump control box of the main
1PCS
3 pump head with 3 hose
2 Power Transformer
1PCS
3 Instructions
1PCS
4 PVC transparent pipe
3M
5 Hose connector
6PCS
Installation
1.
Locate a sturdy and secure platform, and place the unit horizontally in an upright position as illustrated in the
figure below. The dosing pump control box should be housed in a dry, cool, and clean area. Moisture,
debris, or excessive heat may result in electrical failure (not covered by the warranty).
