8
Fitting dynamo-type lights
Hub dynamo:
Before removing the front wheel, disconnect the
dynamo’s electric cable.
Replacing the bulbs:
Bulbs required:
• 6 Volt / 2.4 Watt Krypton type bulb for Elops 3 and Elops 5.
6 Volt / 2.4 Watt halogen bulb for the b’Twin Pack and Elops 7.
HOW TO ADJUST YOUR POSITION ON THE BIKE
Measure your height
Adjust your bicycle
Refer to your settings charts
for my bike
S (cm) Hs (cm) Hg (cm)
16“
105-109
37.5
48.5
110-114
49
115-120
49.5
Elops
S (cm)
Hs (cm) Hg (cm)
155-159
55.5
+12
160-164
58
165-169
60
170-174
62.5
175-179
64.5
180-184
67
185-190
69.5
Directions for use:
Refer to the charts appended to the end of these instructions p 23.
Adjusting the seat:
The minimum seat height is the height when the seat is moved down as far as it will go and once
the clamp is locked.
For more precise
adjustment of your
bike, go to the b'Twin.
com website
Practical information
Depending on the terrain you are travelling on, seat height
can be modified:
- On flat ground or when climbing, the seat should be in a high position for greater efficiency.
- When travelling downhill, the seat should be slightly lowered to improve bicycle control and to
make it easier to get over obstacles.
PLEASE NOTE INSERTION LIMIT!
For your safety, the seat should not be set further than the following warning on the
seat post: minimum insertion.
A
B
C
Summary of Contents for Bicycle
Page 1: ...User guide and terms of guarantee...
Page 23: ...23...
