7
STOP
Warning:
- MTB descents should be practiced safely.
- Ensure that the bicycle is suitable for the purpose (Descents, Cross-country, extreme Freeriding, etc).
- Ensure that the bicycle is in a perfect state of repair.
- To minimise the risk of accidents: wear a helmet, wear suitable protection, control your bicycle and… be careful!
Fitting lights:
(does not apply to dynamo-type lights)
Compatible with
upright handlebars.
Diameter:
19 mm to 32 mm.
Compatible with seat
posts or seat stays.
Diameter:
19 mm to 32 mm.
Front light
A-B-C: Assembly
For best fitting, try to use the
first
hole in the strap.
D: Removal
Press the reflector (1) to push the light forwards (2).
Rear light
Assembly
- The first hole is for fitting to the seat post.
- The second hole is for fitting to seat stays.
Position the rear light horizontally using the
adjustment wheel.
Replacing the batteries:
When the red wear indicator lights up, change the batteries.
Batteries required: Two 1.5 Volt LR14 alkaline batteries.
To open, press on one of the chrome-plated strips (1)
and open by turning the light (2). Battery direction
is shown on the bulb holder and on the inner contact.
Some products may be equipped with different
but similar lighting.
Replacing the bulbs
Bulb required: 2.4 Volt 0.5A Krypton.
Summary of Contents for Bicycle
Page 1: ...User guide and terms of guarantee...
Page 23: ...23...
