background image

 

 

7.1  Tyre pressure 

 

Tyre pressure affects the range and the comfort of your bike. We recommend that 
your tyres always be properly inflated. You are advised to regularly check tyre 
pressure.  
Recommended pressure: 

4.5 Bar front and rear 

 
 

8      Maintenance 

 

 

8.1  Servicing your bike 

 

We advise you to take your bike to the vendor for regular inspections. The first 
service should take place at 3 months, the second after one year, and then 
annually. Regular inspections can avoid long-term damage as well as needless 
expense. 
Of  course,  and  effort  is  also  required  on  your  part  to  keep  your  bike  in  top 
condition for as long as possible. Here are some tips to do just that. 

 

 

8.2  General maintenance 

 

 Inspect the tyre pressure and tread. 

 Inspect wear on brakes, perform full adjustments periodically. 

      3 

 Clean the pedal sensor with a sponge and warm water if it becomes dirty. 

 Oil the chain. 

 

If you notice a problem with a spoke, immediately take the bike to the 
vendor for repairs. 

 

 

 
 

8.3 Cleaning 

 

To clean your bike, use a brush to remove dirt and then wash with hot water. Your 
bike will be perfectly clean. Regular cleaning makes your bike last longer. Be 
careful not to use too much water around the battery. Take care not to let dirt 
accumulate between the magnetic washer and the sensor (near the pedal’s axis on 
the right side of the bike). 
Never use a high pressure hose! 
After cleaning, dry your bike using a soft cloth. 

 
8.4  Lubrication 

 
In addition to regular cleaning, it is best to lubricate the bikes gears at the same 
time in order to prevent corrosion and make it easier to change gears. We advise 
you to lubricate your chain using the grease available from the vendor.  
 

Summary of Contents for B'ebike 9


















Reviews: