btsr SMART KTF 2000, Operating Manual

Page: 85 / 145

SMART KTF 2000 – KTF/RW Operation
SMART KTF 2000 3B-17 -
KEY_TG - Setting the TARGET function access Keycode
SETUP CONFIG KEY_TG
This function allows the setup of a secret code (Keycode) to access the TARGET
function (CONTROL Menu). In this way non-authorized personnel are prevented
from accessing the function.
KEY_TG appears only if the selected application is REWIND.
Once you have selected the > KEY_TG CONFIG screen, press to access the
function.
Enter the code of your choice
(1 to 7 alphanumeric characters) using the following
buttons:
: Increases the character pointed by the cursor.
: Decreases the character pointed by the cursor.
: Moves the cursor one position right.
: Confirms and saves the code which has been set.
If no code is entered, the function is disabled and you will not be asked for an
access code when entering the TARGET function.
Press once to exit the function, or twice to return to the Main Menu.
WARNING: If you set a password (Keycode) you will have to enter it
each time you access the TARGET function. If you forget the access
code it will be necessary to contact your BTSR reseller.