btsr SMART KTF 2000, Operating Manual

Page: 80 / 145

SMART KTF 2000 – KTF/RW Operation
3B-12 - SMART KTF 2000
DEVICE - Numbering the KTF/RW Device
SETUP CONFIG DEVICE
This function allows numbering the connected KTF/RW devices.
During the numbering process, the SMART KTF 2000 terminal automatically
detects the type of connected device ( either KTF/100HP or KTF/RW)
Press to access the function.
NNN Indicates the number of KTF/RW detected. Press to continue.
NNN indicates the number of devices to be configured
(up to 200)
: increases NNN
: decreases NNN
Press once you have setup the number of devices to be configured.
NNN shows the amount of devices setup in the previous step.
XXX shows the number of the first
(and subsequently the next one) device to be
numbered.
On connected KTF/RW the front red LED of STOP/RW starts flashing and the
LCD shows the message
(---) .
Press the button on KTF/RW device to which you wish assign the number
indicated by XXX.
Check that:
a)
the front red LED on KTF/RW turns off.
b) the number assigned appears on relevant KTF display.
c) XXX on SMART KTF 2000 terminal is increased by 1.
After having numbered all the connected KTF/RW the >CONFIG screen re-
appears on the SMART KTF 2000 display and the message 000 re-appears on
KTF/RW display.