12 of 12
BTOD.com • 866.733.0698 • Email: [email protected]
Instructions to Install a Track on a Vert Desk Workstation
Tools Required for Assembly
A. Power Driver with Adjustable Torque
A
Hardware Included for Assembly
B. 3/4” Wood Screw
x2
B
Step 1:
Place the front of the track against the bottom of the worksurface 1/8”- 5/8” from the front edge of the
worksurface and place the back of the track on top of the U-channel’s lip.
Step 2:
Attach the track to the worksurface using four wood screws. Do not over-tighten the wood screws.
Use a low torque setting on the power driver.
Step 3:
Complete the installation using the instructions that came with the product you are installing.