![background image](http://html.mh-extra.com/html/btm/lance-n-loc/lance-n-loc_user-manual_2825662005.webp)
3.0 sTaRT UP PRoCeDURe
Hang the Booster as shown.
Gun should operate lower
than booster.
Start-up continues on the next page.
Read all safety instructions before operating the unit!
1. After removing your Tog-L-Loc/Lance-N-Loc system from its shipping box, make sure that you have
received two sets of Tog-L-Loc, or Lance-N-Loc, tooling. One set is already installed in the gun. The
second set should be in a package attached to the gun. Remove the second set of tooling and store
it aside.
2. Visually inspect the system for damage due to shipping. If damage has occurred, call BTM
immediately.
3. Check hoses, yoke, and the compression mechanism regularly for damage or cracks. Discontinue
use if such conditions exist.
4. Remove the booster unit from the box and hang it from the hole in the handle. Make sure the
booster unit is securely hung and will not fall or injure someone. The booster should be higher than
the gun during operation.
Hang the Booster as shown. Gun should operate lower than booster.
sT
aRT
UP
PR
o
Ce
DUR
e