2.0 safeTy
UseR ResPonsIlbIlITy:
Each person who is to operate or maintain the Tog-L-Loc unit must be
familiar with these, and all other, safety precautions before attempting to use or to service the press
equipment. The owner of the equipment is responsible to train and supervise all personnel as to
safety precautions.
DanGeR:
NEVER place hands, fingers, or other body parts in the path of the die and the ram. Accidental
operation or damaged and worn control devices can result in severe injuries. ALWAYS use tongs, or
other inserting devices, to place materials in the press operating area. DO NOT operate with a second
person holding the parts in the unit for joining.
safeTy Glasses:
Wear safety glasses while operating this system.
safeTy ConTRol InTeGRITy:
Do not alter the control systems, or safety guarding, in any way.
safeTy ConTRol MaInTenanCe:
If a control or operating switch is damaged, or fails to work
properly, discontinue use immediately and do not use until the controls are repaired, or replaced and
the machine is tested by a qualified, machine maintenace engineer.
eQUIPMenT RePlaCeMenT PaRTs:
Use only original BTM hoses and components with this
system.
WoRK MaTeRIal CoMPaTIbIlITy:
Do not attempt to join materials other than those specified by
BTM for your tooling.
safe
Ty