B T L - 1 3 0 0
U S E R M A N U A L
M e d i c a l T e c h n o l o g i e s s . r . o .
p a g e 6 o f 9
1 . 4 C O N N E C T I O N T O T H E M A I N S
1. Connect the higher motor (M2) that secures lifting of the middle part and the lower motor (M1) that operates the
whole table.
2. Connect the control panel to (M1).
3. Connect the mains cable from (M1) to a 230V plug.
4. Using the control panel check the table adjustment.
1 . 5 S A F E U S E I N S T R U C T I O N S
•
When adjusting the head or foot rests downwards, it is necessary to hold these parts before releasing the safety
levers
•
When manipulating the table on the wheels, move it only on an even surface! Otherwise it is necessary to lift the
table.
•
The table cannot be adjusted to any height when loaded with more than 170 kg. Do not overload the table.
1 . 6 W A R N I N G
•
When lifting up the table, the upper desk also moves horizontally.
•
When you wish to have the table at a place with uneven floor, eliminate the unevenness with a height adjustable
screws in the frame of the table.
•
Pedals that lift the table onto the wheels are placed on both sides of the table at the foot end.
1 . 7 C L E A N I N G A N D M A I N T E N A N C E
Wash the upholstery with a detergent. Disinfect using for example a 10% Persteril solution. Do not use acetone-based
substances.
Revolving bearings of the metal frame are equipped with plastic and brass cases. We recommend to grease the brass
cases.
2 T E C H N I C A L S P E C I F I C A T I O N S
BTL-1300
2-section
BTL-1300
3-section
BTL-1300
5-section
BTL-1300
Bobath couch
BTL-1300
Trac
Length
(cm)
195 195 195 195 210
Standard
width
(cm)
70 70 70 90 70
Reduced width: 60cm
o
o
o
-
-
Extended width: 80cm
o
o
o
-
-
Conical narrowing of the foot section
o
o
o
-
-
Height adjustment: 42-95cm
x
x
x
x
x
Mid-section elevation: 0-22cm
-
x
x
-
-
Horizontally movable foot section: 15 cm
-
-
-
-
x
Head section adjustment: +45°/-30°
x
x
x
-
x
Foot section adjustment: 0°/+30°
-
o*
o*
-
-
Mid-section adjustment together with
Foot section adjustment: 0°/+20°
-
o*
o*
-
-
Backrest adjustment: 0°/+40°
-
-
-
o
-
Weight: 90-110kg (according to model)
x
x
x
x
x
Load
capacity:
170kg
x x x x x
Mains
supply:
230V/50Hz
x x x x x
x – standard, o – optional, * available only in configurations with electrical adjustment of the mid-section