7/15
ELIOT Kit Salvavita Connesso
Cat. N°: G723SC
4. PREPARATION - CONNECTION
(continued)
Salvavita Connesso signalling led:
Possible states:
Led color
State
Meaning
red
Fast blinking
Waiting for manual or remote
reset command after:
- a remote opening command
- a temporary fault
If the Salvavita Connesso detects
a too recurrent fault, remote
actuation is disabled
Steady
Salvavita Connesso has detected
a permanent default in the system
after a tripping.
Remote actuation is disabled
green
Fast blinking
Salvavita Connesso in MAN mode
Steady
“Normal situation”: associated
device is powered and Salvavita
Connesso in AUTO mode.
Switched-off
Salvavita Connesso not supplied
or sliding front face downward
Wi-Fi module signalling led:
. Power led: indicates the status of operation of the interface:
-
Steady green
interface supplied
-
Steady off
interface not supplied
4. PREPARATION - CONNECTION
(continued)
Wi-Fi module signalling led
(continued):
. Wi-Fi led: indicates the status of the Wi-Fi Network:
Possible states:
Led color
State
Meaning
red
Slow blinking
No Wi-Fi- network detected or
connection problems
Fast blinking
(pressing the multi
function button
longer than 30 sec.)
Total reset
[any firmware updates are
preserved]
Steady
Wi-Fi signal ≤ 25%
green
Slow blinking
Scanning for Wi-Fi network
(during association procedure)
Fast blinking
Programming via WPS button
of the Wi-Fi router
Steady
Wi-Fi signal ≥ 50%
orange
Slow blinking
Interface not associated to any
network
(Factory configuration)
Fast blinking
Manual Programming mode
Steady
Wi-Fi signal between 25% and
50%
Wi-Fi module front face button:
. It is used to put the Wi-Fi interface in programming mode or to restore
factory settings:
Possible states:
Pressing time
Action
t ≈ 3 sec.
Wi-Fi interface put in configuration mode via
WPS button
t ≈ 7 sec.
Wi-Fi interface put in configuration mode via
“Manual procedure”
t > 30 sec.
Wi-Fi interface total reset
[any firmware updates are preserved]
Technical data sheet: IDP000172EN_01
Updated: -
Created: 08/09/2017
