![background image](http://html1.mh-extra.com/html/bticino/my-home/my-home_technical-manual_2825518061.webp)
TECHNICAL FEATURES
MY HOME
GUIDE
2 WIRE SOUND SYSTEM
59
TECHNICAL FEATURES
With an appropriate configuration, these My Home Automation system
devices can be used to receive signals from the radio controls and to manage
the following functions of the 2-wire Sound system:
- ON/OFF function of the amplifiers;
- volume adjustment;
- selection of sound sources;
- change of stored radio stations (from radio Item F500) or track (when using
a CD reader).
The interface Item L/N/NT4575SB is specifically used with the Radio control
Item L4572SB.
RADIO INTERFACES ITEM HS/HC4575, ITEM L/N/NT4575N E ITEM L/N/NT4575SB
TECHNICAL FEATURES
Wire-radio interface and Touch Screen
Power supply:
27V d.c. from BUS
Transmission frequency:
868 MHz
Absorption:
22mA (Item L/N/NT4575N and Item HC/
HS4575) 33mA (Item L/N/NT4575SB)
Size:
2 LIVING INTERNATIONAL/LIGHT MODULES
Operating temperature:
+5°C to +35°C
Technical data
1 LED
2 Pin button for programming
3 Configurator housing (see chapter “Configuration” for details)
4 Pull-out terminal for connection to the BUS
Legend
TOUCH SCREEN ITEM L/N/NT4683 AND ITEM H4684
This device can centralise and control all the functions of the MY HOME
system (Sound System, Automation, Burglar-Alarm, etc.) at the touch of a
finger. By interacting with various icons on the backlit display, previously
configured with the Tidisplay software, you can select and activate the
various sound sources, adjust the volume, select the radio stations to be
listened to and read the RDS messages. A TOUCH SCREEN function allows
using the Sound System as an alarm clock. After setting the time on the
TOUCH SCREEN, the sound source set will switch on at the time set and
the loudspeakers will switch on, first at a low sound level (20%) and then
reaching a higher level (80%) after 2 minutes (automatic switching off).
The alarm clock is switched off by touching the TOUCH SCREEN or the “OFF”
pushbutton of an amplifier. The TOUCH SCREEN is easily installed on the wall
using box Item 506E and is completed with cover plates Item L/N/NT4826…
(Item L/N/NT4683) or with cover plates AXOLUTE Item HA/HB4826... (Item
H4684).
Supply voltage from BUS: 18 to 27 Vd.c. (from BUS)
Size: installation on box 506E
Absorption: 20mA
Operating temperature: 0°C to 40°C
Technical data
1. terminal to connect the cable to the PC which is used to program the
device
2. pull-out terminal for connection to the BUS
Legend
Front view
Rear view
1
2
Front view
Rear view
1
2
4
3