background image

26

Living Now with Netatmo

Installation Manual

Dissociate a wireless control from the connected devices

Reset to the factory settings

1.  Press at the same time the two pushbuttons of the control to dissociate until the LED turns 

orange. 
While the LED is orange release the pushbuttons.

1.  Remove the plate and the cover to access the reset button.

2.  Press and release the two control keys at the same time. 

The LED will start flashing green, then turns blue, and then turns off.

1

1

Procedure for wireless controls K4003CW – K4570CW – K4003DCW – K4574CW – 3577C wireless 
light control; 
or 
K4027CW wireless shutter control

2

2

Warning:

 this procedure completely dissociates the device from the smart electric system.

Warning

:never reset the K4570CWIN/OUT Master control; in case of reset, start the association with the 

zigbee network by quickly pressing the Gateway reset pushbutton, and then press and release a key of 
the K570CW control and wait for the association to take place (the control key flashes green for a few 
seconds and then turns off).

K4003CW – K4003DCW – 3577C wireless light control 

or 

K4027CW wireless shutter control

1

Summary of Contents for Living Now with Netatmo































Reviews: