7
6
Thermostat with display
Installer manual
2.2 Front view
1 -
Heating function.
2 -
Cooling function.
3 -
Manual mode icon.
4 -
Comfort mode icon.
5 -
Eco mode Icon.
6 -
Antifreeze / Thermal protection / OFF mode.
7 -
MODE key: a short pressure changes the mode of operation of the device; an extended
pressure (unless used as MyHOME probe) changes the function.
8 -
+
key: increase the set value.
9 -
–
key: decrease the set value.
10 -
FAN key: set the fan-coil speed on 3 automatic.
11 -
Heating On indicator.
12 -
Cooling On indicator.
13 -
Fan-coil speed indicator, 3 levels.
14 -
Fan-coil in automatic mode indicator.
15 -
Window indicator: active local contact according to the programming.
16 -
Measured (thermometer symbol On) / set (thermometer symbol Off) temperature indicator.
17 -
Unit of measure: °C or °F.
2 Description
MODE
+
–
FAN
10
7
8
9
1 2 3 4 5 6
11
12
13
14
16
17
15
*
( * ) Auto Mode
The remote setting (control unit or
supervision software) follows.
In the case of MyHome systems,
the icons shown with asterisks do
not appear on the display when
the corresponding modes are set
remotely.
NOTE: Some local functions, such
as switching the heating/cooling,
setting the comfort, eco and
antifreeze/heat protection modes
and automatic adjustment of the
fan-coil fan can be disabled when
configuring.
Pressing the pushbutton to activate
one of the deactivated functions will
have no effect.
