RADIO CONTROL L4572SB
12
RECEIVING INTERFACE L/N/NT457SB
13
A
room
PL1
light point 1
(sound point 1 only for sound system SPE=8)
M1
mode 1
PL2
light point 2
M2
mode 2
SPE
special
M1
PL2
M2
PL1
A
SPE
CONFIGURATION OF THE RECEIVING INTERFACE
14
L4572SB
For use with Living International cover plates,
remove the side parts shown in grey in the figure
By means of the receiving interface item L/N/NT4575SB, this device can control the My Home system.
The control does not need a flush-mounted box because it can be installed on the wall using two-sided adhesive tape (supplied),
thus not requiring making holes in the wall, or with normal rawlplugs.
Pin pushbutton
Luminous
indicator,
LED
The radio interface lets the radio control L4572SB control the My Home system.
L/N/NT4575SB
Front view
Rear view
To use the radio control and receiving interface the interface must first be configured and then programmed.
GB