Bticino F500 COAX, Instruction Sheet

Page: 36 / 76

item F500
36
RDS message Indication of automatic
search mode
Stations saved
Stereo signal
indication
Frequency
tuned
SWITCHING ON
After installing the Tuner (or after a power cut) and if no device has requested switching
on the radio, with backlighting OFF, the display shows "MY HOME" and the indication
"STANDBY".
The Radio Tuner has a display with backlighting, which comes on when any of the
pushbuttons is pressed. One minute after the last press the backlighting and the LED go
out. Activating the device by means of the commands on the front of the tuner does
not involve switching on the amplifiers in the rooms.
INTRODUCTION
DISPLAY
The display shows the message RDS sent from the tuned station (only if available from
the radio stations), the tuned frequency and the number of the station played.
There are also two indications "STEREO" and "FM CH" which indicate if the tuned signal
is stereo and if automatic station search has been selected.