9
PROGRAMMING
1) Switch on the device.
2) Keep the micro pushbutton pressed until the LED lights up (about 4 seconds).
3) Release the key.
4) Within 20 seconds send the signal from the radio control device to be programmed.
Example:
For remote control item 3527 press the key to be associated with the actuator.
5) The LED fl ashes and then goes out, indicating that programming has taken place.
6) Repeat the sequence of operations from point 2 to point 5 for all the radio control devices to be programmed (max. 16).
10
CANCELLING
This operation cancels all the radio control devices previously programmed in the actuator.
1) Switch on the device.
2) Keep the micro pushbutton pressed for 11 seconds (after 4 seconds the LED switches ON, after another 7 seconds the LED
switches OFF).
3) Release the key.
4) The LED fl ashes and then goes out, indicating that all the radio control devices previously programmed in the actuator have been
cancelled.
��������
�� �� � � �
1
2
3
����������
�� �� � � �
1
2
3
����������
�� �� � � �
1
2
3
����������
�� �� � � �
1
2
3
����������
�� �� � � �
1
2
3
����������
�� �� � � �
1
2
3
����������
�� �� � � �
1
2
3
����������
�� �� � � �
1
2
3