22
Smart with Netatmo electric system
Installation Manual
The LEDs flash three times blue. Release the wireless control.
The control LED goes from blue flashing to off, turns on again blue for a second and then turns off.
The LED of the connected device goes from blue flashing to green, then turns back to blue for one
second and then again to green.
If only one connected device needs to be associated, go to item 6 to complete the association,
otherwise continue as indicated at item 5.
Wireless light control
or
Wireless shutter control
1
Wired device
The wired devices to be associated with the controls can be of different types, always respecting
the correspondence of the light or shutter function.
In this example, the first device is a connected two-way switch, the second is a connected socket
module.
5. Press and hold down one of the two keys of the wireless control to associate, with the control,
touch three times (gently and in quick sequence)
the connected device to associate.
5
2
Wired device*
2
*Note
: connected sockets can be associated with a wireless light control. These sockets are not as a rule
operated by the wireless scenario controls that control lights. However, it is possible to define or modify
and include the actions that will be performed by the four scenarios through the Home + Control App.
