12
Smart with Netatmo electric system
Installation Manual
7.
Start the association
:
press and hold down the two control keys at the same time, the LED will turn green, the LED
switches off.
Master wireless In&Out scenario control
7
7
1
2
Note
: this operation is not automatic with plug&play sockets: it will be necessary to keep the ON/OFF
button pressed until the LED starts flashing green.
Check that the LEDs of all the devices turn green steady (with the exception of the wireless LEDs,
which will be off ).
Note
: the LEDs may take up to 15 minutes to turn from red to green.
After this time, the procedure will end automatically.
