70
Address Information
ADDR TYPE:
HARD
ADDR-HARD: 001
ADDR-SOFT:
001
BACK
EXIT
-Move the cursor to SITE INFORMATION and then click confirm button.
- ADDR TYPE:
There are two options: soft and hard. Use the left/right button on the keyboard or in the speed dome
terminal menu to set. Click the OK button to confirm
- ADDR-HARD:
It is an address you set in the dial switch. Not modify it through software.
- ADDR-SOFT:
You can set address via software. You can use menu to modify dome address.
The value ranges from 1 to 255.
- BACK:
Go back to the previous menu.
- EXIT:
Log out system menu.
System Time Setting
YEAR:
2009
MONTH:
001
DATE:
017
WEEK:
SUNDAY
HOUR:
013
MINU:
052
SAVE
BACK
EXIT
- Move the cursor to SYSTEM TIME SETING click confirm button, go to the third submenu.
- Use the left/right button on the keyboard or in the speed dome terminal menu to set.
- After completed setup, click confirm button to save current setup.
- After speed dome menu displays OK, the setup is valid.
5.4.2 Display Setting
PRESET TITLE: ON
AZIMUTH DISP: ON
TIME DISP:
OFF
POSITION:
OFF
ZOOM DISP:
OFF
INSIDE TEMP:
°C
TITLE DISP:
OFF
BACK
EXIT
Move the cursor to DISPLAY SETUP and click confirm button, go to the third submenu.
Use the left/right button on the keyboard or in the speed dome terminal menu to set.
After completed setup, click save button to save current setup.
- PRESET TITLE:
Display dome preset title or not. Use the left/right button on the keyboard or in the speed dome
terminal menu to set. Go to Function Setup->Preset section to set corresponding preset
value and preset title.
- AZIMUTH DISP: Display dome current coordinates or not. Use the left/right button on the keyboard or in the speed
dome terminal menu to set
- TIME DISP:
Display dome system time or not. Use the left/right button on the keyboard or in the speed dome
terminal menu to set.
- POSITION:
Display the angel between the benchmark and then current location.
Use the left/right button on the keyboard or in the speed dome terminal menu to set.
