![background image](http://html1.mh-extra.com/html/bticino/391780/391780_quick-start-manual_2825495068.webp)
68
The above diagram illustrates the overall structure of the speed dome setup menu.
Note:
- ERR means current setup is invalid.
- Please make sure all the cable connections are right.
5.2 Self-diagnosis system information
ADDR:
001-H
BAUD RATE:
9600
PARITY:
NONE
PROTOCOL:
PELCO-P
SOFTWARE:
V1.04.3
BACK
EXIT
After installation, connect speed dome to power. The system goes on a self-diagnosis, and then il pops up the above
interface to show the system information.
If there is anything wrong during the self-diagnosis, system pops up error code. The above interface disappears after
speed dome received after speed dome received the first commande (or the display time lasts for 4 minutes).
-ADDR:
Here you can view dome address information.
For example, 001-H, 1 is the address number, -H is hard address mode. -S is software address mode.
- BAUD RATE:
Dome communication baud rate.
- PARITY:
Communication protocol.
- SOFTWARE:
Dome PTZ software version.
5.3 Main menu
SYSTEM INFORMATION
DISPLAY SETTING
CAMERA SETTING
FUNCTION SETTING
EXIT
- SYSTEM INFORMATION:
Dome self-diagnosis information, address information, system time setup, set north
direction, language, language, factory default setup, reboot and so on.
- DISPLAY INFORMATION: Display dome preset title, azimuth display, time, direction, dome internal temperature and
ect information.
- CAMERA PARAMETERS:
Display dome white balance setup, camera function setup, day/night setup, shutter setup
- FUNCTION SETTING:
Set preset, pan, scan, auto cruise, pattern, idle motion, time task and pivacy mask function.
- EXIT:
Log out the system menu.