background image

2

BT00642-a

344192

P
M

N

-EN

TECHNICAL SHEETS

Configuration

The device must be only physically configured.

N – handset number

The N configurator assigns each video handset an identification number within the 
system. The handsets must be configured in progressive order. The handsets must be 
configured in progressive mode. Handsets with parallel connection (max 3 are allowed 
inside the apartment without item 346850) must be configured with the same N 
configurator. Additional audio handsets, video handsets and/or bells can be installed in 
parallel to the basic video handset.

P – entrance panel association

The P configurator identifies the associated EP, or the first entrance panel that switches 
itself on when the pushbutton is pressed the first time, as well as which door lock with 
idle video handset is activated, when the pushbutton is pressed.

M – operating mode

The M configurator assigns the operating mode to the 4 programmable keys following 
the indications of the following pages.

The video handset offers the possibility to select among 16 types of bells with 
programmed ringtones, which can be freely associated to the following type of calls:

- Calls from the entrance panel (configured with S=0)
- Calls from the entrance panel (configured with S=1)
- Intercom call
- Floor call

(See the bell programming table in the following pages)

Summary of Contents for 344192











Reviews: