2
PIR
US
≥ 2,5 m
1 m
2,5 m
067226 HD/HC/HS4658
L/N/NT4658N
574048
574098 AM5658
Positioning the sensor
Installation
Settings
Position the sensor so
that it is not affected by
the artificial light already
present in the room.
Sensor parameters
Default value
Adjustable parameters
Configuration remote control
88230
88235
BMSO4001
BMSO4003
Time delay
15 mn
3,5,10,15,20 min
−
30s - 255 h 59 min 59s
−
Sensitivity
PIR (very high) / US (high)
Low, medium, high, very high
Brightness threshold
300 lux
20, 100, 300, 500, 1000 lux
−
0 - 1275 lux
−
Opera
ting
mode
Auto
Not active
ON/OFF
Walkthrough
ON
ON/OFF
Eco
Not active
ON/OFF
Det
ec
tion
mode
Initial
PIR and US
PIR and/or US, PIR, US
−
Holding
PIR or US
PIR and/or US, PIR, US
−
Retrigger
PIR or US
PIR and/or US, PIR, US, OFF
−
Alarm
Not active
ON/OFF
−
Ad
vanced mode
Calibration
−
0 - 99995 lux
−
Adjustment
Not active
ON/OFF
−
Contribution of light
Automatic
Automatic - 1275 lux
−
PIR+US flush-mounted SCS Green Switch
MQ00473-f-EN
09/06/2014
Time delay
The period of time after which the load is switched off if no movement is detected.
The time restarts whenever the sensor detects a movement.
Sensitivity
Adjustment of the sensitivity of the detection technology used.
Brightness threshold
Lighting level below which the sensor activates the load and above which it
switches it off.
Operating mode:
Auto
The load is automatically switched on:
- upon detection of a movement if the level of natural light is insufficient.
The load is automatically switched off:
- if no movement is detected at the end of the set time delay + standby time.
- or if the level of natural light is insufficient (adjustment on).
Each new detection causes automatic switching on if the light is insufficient.
Walkthrough
