Scan Mode
To set the lte network scan mode, perform the following steps:
choose
Network>Scan mode
;
You can choose
full mode
, a band the CPE supported
Click
Submit
.
Setting Frequency (Earfcn)
To set the frequency, perform the following steps:
1
Choose
Network
>
Scan Mode
.
2
In the
Scan Mode
area, choose
Frequency
Lock
.
3
In the
Frequency Lock
area, you can choose a band, then click
Add list
to choose a
Earfcn Number
.
4
Click
Submit
.
As shown in Figure 5-11.
Figure 5-11
APN Management
To set and manage APN, perform the following steps:
Choose
Network
>
APN Management
.
In the
APN Management
area, you can set the APN.
Choose a
APN number
which you want to set.
In the
APN Setting
area you can set the APN parameters, such as enable or disable the apn,
apn name, username, password and so on.
If you want set a APN as
default gateway
, you should check that is enabled.
Click
Submit.
As shown in Figure 5-12.
Summary of Contents for CP880-A
