1.5 - CE Declaration
8
MBT-4500 Product Introduction
M2079/3en
© BTG 2016
1.5 CE Declaration
When using the units in other combinations than those tested for, BTG can not
guarantee CE directive conformity.
The units in combination with customer-installed external devices may conform
with EMC and safety requirements when properly installed and CE-marked
equipment is used.
The system operator is responsible for CE directive conformity.
Conformity must be verified by inspection.
CE-Declaration of Conformity
According to EN 17050-1:2005
Manufacturer´s Name
BTG Pulp & Paper Sensors AB
Manufacturer´s Address
P.O. Box 602 S- 661 29 SÄFFLE, Sweden
declares that the product:
Product Name
Viscosity Transmitter
Model Number
MBT- 4500
complies with the amendments and
requirements of the:
LVD Directive
2006/95//EC
EMC Directive
2004/108/EC
PED Directive
97/23/EC
and conforms with the following product
standards and PED conformity assessment
procedure
Safety
EN ISO 12100-1
LVD
EN 61010-1
PED
Pressure accessory for piping
in accordance to:
Guideline related to Article 1, 2.1.4
Accepted by WPG on:
1998-11-26
Accepted by Working Group "pressure" on:
1999-01-2
Must not bear CE-marking
EMC
EN 61000-6-4:99
EN 61000-6-2:04
Quality System
ISO 9001
monitored by
Lloyd`s Register Quality Assurance
Säffle,
november 2010
MD Björn Fahlin
