BTEK DD 700, Installation Manual

Page: 13 / 34

11
INSTALLATION MANUAL DD700
2.2 Opening the terminal
2.2.1 ABS Version
Figure 2.2-1 - Opening the terminal
Referring to the previous figure, proceed as follows:

Remove the four screws (ref. 1) and rotate the cover forward, holding it up with one hand to
avoid damaging the connections.

Disconnect the display connector. (ref. 2).

Remove the mass eyelet.

Disconnect the connector from the keyboard (ref. 3).

Place the complete display cover and keyboard on a work table.
DANGER
When performing installation or maintenance on components inside the terminal, always make
sure that it is disconnected from the electrical mains.
2
1
1
3