VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
29
Scanning modes
The scanner is configurable to one of three ways of operation: Time, carrier or search, each of which is
explained in further details in their respective section below.
1.
Press the
key to enter the menu.
2.
Enter “17” on your numeric keypad to come to scanner mode.
3.
Press the
key to select.
4.
Use the
and
keys to select scanning mode.
5.
Press the
key to confirm and save.
6.
Press the
key to exit the menu.
Time operation
In Time Operation (TO) mode, the scanner stops when it detects a signal, and after a factory pre-set time
out, it resumes scanning.
Carrier operation
In Carrier Operation (CO) mode, the scanner stops when it detects a signal, and after a factory preset
time with no signal it resumes scanning.
Search operation
In Search Operation (SE) mode, the scanner stops when it detects a signal.
To resume scanning you must press and hold the
key again.
